? operating stabilities to 0.5 ppm stratum iii stability of 4.6 ppm (non-holdover) over an operating temperature of -40 c to +85 c for ten years 3.3 v or 5.0 v operating voltage ideal for signal processing, military/avionic communications, flight controls, wlan, basestations, dwdm, serdes, sonet/sdh, 10g and 40g ethernet applications introduces m6001/m6002 series tcxo and m6003/m6004 series vctcxo mtronpti corporate headquarters 100 douglas avenue po box 630 yankton, sd 57078-0630 1-800-762-8800 www.mtronpti.com
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is a ssumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specific requirements: mtronpti 1-800-762-8800. application information m6001, m6002, m6003 & m6004 series 9x14 mm fr-4, 5.0 or 3.3 volt, hcmos/ttl, tcxo and vctcxo mtronpti is one of the first companies to introduce a family of low voltage, surface mount tcxo?s and vctcxo?s (voltage controlled tcxo) that are designed to provide network and wireless engi- neers with products that offer tight stability and excellent aging characteristics. the m6001-6004 series utilizes hermetically sealed crystals, along with a ?low-aging? process, to achieve consistent, long-term stability and minimal frequency shift in the customer?s application after re-flow. with this process, a first year aging rate of less than 1 ppm is achievable. a stability of 0.5 ppm over 0c to +70c is available as well as stabilities ranging from 1 ppm to 4.6 ppm over -40c to +85c. a special version (l-stability option) of the m6001-6004 is available for stratum 3 applications. mtronpti?s unique approach to crystal compensation enables these devices to achieve stratum 3 stability ( 4.6 ppm) from -40c to 85c. the low phase noise (-143 dbc/hz @ 10 khz) make the m6001-6004 ideal for those design engineers working on high data-rate, low ber data communica- tion network products. the m6001/m6002 (3.3 v and 5 v tcxo) and m6003/m6004 (3.3 v and 5 v vctcxo) are ideally suited for a wide range of applications such as: sonet, sdh, serdes, and pcs base stations; point to point/multi-point radios; wdm systems; gig-ethernet; 10g and 40g systems; test and mea- surement; frequency synthesis; frequency translation; specialized mobile radio, and wlan. stan- dard output for the m6001-6004 series is hcmos compatible and draws as little as 4 ma with a 3.3 volt supply at 19.440 mhz frequency. this low power consumption provides an advantage over similarly specified ovenized oscillators for power-sensitive applications. customers can order product with or without the tristate feature. the m6003-6004 series offers 10 ppm minimum pull range with excellent tuning linearity performance for critical ppl applications. these products are available in frequencies from 5 to 30 mhz, and can be offered in a surface mount fr-4 based platform with industry standard 9 x 14 mm footprint. contact the factory for 14 pin dip configuration.
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is a ssumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specific requirements: mtronpti 1-800-762-8800. pin connections m6001, m6002, m6003 & m6004 series 9x14 mm fr-4, 5.0 or 3.3 volt, hcmos/ttl, tcxo and vctcxo features: operating stabilities to 0.5 ppm stratum iii stability of 4.6 ppm (non holdover) applications: ideal for signal processing, military / avionic communiations, flight controls, wlan, basestations, dwdm, serdes, sonet / sdh, 10g and 40g ethernet applications.
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is a ssumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specific requirements: mtronpti 1-800-762-8800. m6001, m6002, m6003 & m6004 series 9x14 mm fr-4, 5.0 or 3.3 volt, hcmos/ttl, tcxo and vctcxo
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is a ssumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specific requirements: mtronpti 1-800-762-8800. solder profile: m6001, m6002, m6003 & m6004 series 9x14 mm fr-4, 5.0 or 3.3 volt, hcmos/ttl, tcxo and vctcxo tape and reel specifications:
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is a ssumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specific requirements: mtronpti 1-800-762-8800. orlando 2525 shader rd orlando, fl 32804 usa phone: 407-298-2000 fax: 407-293-2979 email: salesorl@mtronpti.com y ankton po box 630 yankton, sd 57078-0630 usa phone: 605-665-9321 toll free: 800-762-8800 fax: 605-665-1709 email: salesykt@mtronpti.com san jose 985 university ave suite 38 phone: 408-395-0700 fax: 408-395-8074 los gatos, ca 95032 usa email: salesca@mtronpti.com europe the netherlands phone: 31-40-368-6818 fax: 011-31-40-368-3501 email: saleseu@mtronpti.com asia pacific 1104 shanghai industrial investment building 48-62 hennessy road wanchai, hong kong, china phone: 852-2866-8023 fax: 852-2529-1822 email: saleshk@mtronpti.com m6001, m6002, m6003 & m6004 series 9x14 mm fr-4, 5.0 or 3.3 volt, hcmos/ttl, tcxo and vctcxo quality parameters: handling information: although protection circuitry has been designed into the m6001 - m6004 series, proper precautions should be taken to avoid exposure to electrostatic discharge (esd) during handling and mounting. mtronpti utilizes a human-body model (hbm) and a charged-device model (cdm) for esd-susceptibility testing and protection design evaluation. esd voltage thresholds are dependent on the circuit parameters used to define the mode. although no industry-wide standard has been adopted for the cdm, a standard hbm (resistance = 1500, capacitance = 100 pf) is widely used and therefore can be used for comparison purposes. the hbm esd threshold presented here was obtained using these circuit parameters.
|
